Quick Contact Form -

Name :: Enter Code ::
Company ::
Telephone ::
E-mail ::
Address ::
Requirements   
in Brief ::

Cleanrooms

A cleanroom is a controlled environment, typically used in manufacturing or scientific research, in which the concentration of airborne particles is controlled to specified limits. Stormor Systems can design, supply & install cleanrooms which meet your specific needs from Class 100,000 to 1000 (ISO 8-6). The cleanrooms we supply can be installed complete with the air handling and monitoring system, flooring, etc. 

Stormor Systems supplies cleanrooms that are constructed of steel partitioning panels which are a high quality double skin type and are available in a range of sizes and glass & steel configurations. Although these suit the cleanroom environment perfectly, the partitioning can be used in other applications too.

The most important element of a cleanroom is the air handling. There are 2 main categories of airflow – laminar & non-laminar. Non-laminar systems are cost effecting and typically used for lower classed rooms ie rooms which are classed for a higher contaminent count allowance. Laminar systems give better performance by pushing particles through a perforated raised floor and hence can be used for classes with a lower particle count allowance. The air handling unit will also control the temperature and humidity , if required.

Gallery

Cleanroom Exterior Cleanroom Interior
Cleanroom Entry Cleanroom with ceiling services
 
Frame Joining Unit joins frame to provide heights up to 12 meters Frame Joining Strap secures back-to-back bays quickly and safely Frame available in heights from 1200mm to 3900mm and depths of 450mm to 1200mm Mesh Panels frames can be supplied as open, mesh clad of steel clad Foot Plate clip-on or bolt-on, provides positive floor fixing for added stability Lateral Dividers can be used with specially pierced shelf panels Stepped Beam Beam Tie Shelf Cladding Support – Stepped Beam Shelf Cladding Support – Box Beam Cladding Location Bracket provides positive location for chipboard cladding on boxed beams. Steel Cladding Box Beam Chipboard Shelving Galvanised Steel Shelf Panels span across beams to form a solid steel shelf Vertical Divider: Used to divide shelves horizontally into smaller storage compartments. Reinforced leading edge provides extra strength. Easily repositioned on shelf. Tambour Door Kit: Roller shutter doors for security and dust protection of items stored. When open, door does not protrude into aisle making this an ideal solution for secure storage where aisles are narrow. Full Height Door Kit: Hinged doors transform shelving into a secure storage cupboard. Doors feature full height vertical stiffener, 2 point locking, recessed handle and safety key. Duo Frame: Double skinned box section, clear entry frame. Also allows clear access to the full shelf width, eliminating ‘snagging’ of items stored. Complies with clear access requirements of BS5454. Pull-out Filing Cradle: Can accommodate A4 and foolscap top loaded suspension files. Rear Cladding: Solid interlocking steel sheets that enclose the rear of the bay. Also gives essential stability to the bay structure as an alternative to cross-bracing. Frame Floor Clip: Simple clip-in bracket which allows all types of Stormor frames to be floor fixed. Can be shimmed by using Stormor shim plates. Fits within bay footprint. Floor Plinth: Floor plinths prevent dust and debris collecting under the shelving. Sim0ply clips to the underside of shelf to create a smooth overall finish of the front face. Plastic Drawers: Ideal for the storage of small items. Available in 3 sizes, the drawers tilt on integrated back-stops to allow easy viewing and access. Can also be sub-divided internally using dividers. Half Height Door Kit: Hinged 1100mm high door. Creates secure storage cupboard within shelving. Doors are stiffened to the full height and have 2-point locking, recessed handle and safety key. Pull-out Drawer: Ideal for the storage of CD’s, electronic media and other small items within a shelving bay. Available in 3 heights. Bin Fronts: When fitted these prevent items falling off the front of shelves. Also when used with shelf dividers they form enclosed compartments or ‘bins’. Can be used as heavier duty back-stop. Document Divider: Slim profile divider ideal for paper and record storage. Ensures maximum use of shelf capacity. Easily relocated on shelf. Pull-out Reference Shelf: Provides a flat and stable work surface for document or file reference within the aisle. Part Height Dividers: 150mm high divider which slots either on top or below the shelf to provide storage compartments or support for files and similar tall material. Back Stop: Fits across the rear of bays to prevent files falling off the back of a shelf. Simply slots into the upright. Mesh Cladding: Can be fitted to open frames and as rear cladding for all frame types. Retains visibility and ventilation for the items stored. Box Section Shelf: 25mm welded box section shelf on the front and back edges for greater load bearing capacity. Fits all above frames plus the Euro shelving frame. Clip-in Garment Hanging: System of rail and which fit within bay widths to allow the hanging of garments. Rails can be re-positioned as required to create double hanging space. Under-shelf Divider: Divider simply clips in under the shelf to hold books, files etc upright. Divider can be repositioned as required. For use with dual Use shelves only. Mono Frame: Clear entry, open shelving frame for heavier duty applications and where ventilation is required. Cross Brace: Provides stability bracing for open back shelving. Used where rear cladding is not specified. Dual Use Shelf: 25mm section shelf with a formed open flange. Also carries suspension filing underneath the shelf at appropriate depths. Fits all above frames plus the Euro shelving frame. Solo Frame: Solid frame featuring a delta profile front post with a T-section rear for easy and immediate fitting of cross bracing and cladding.