Pallet Racking

 Adjustable Pallet Racking is a frame and beam system capable of carrying heavy loads.  It’s easily installed, cost-effective and versatile.

Efficient storage of palletised goods is determined by many factors including:

types of goods stored
speed of throughput
accessibility
type of trucks used
amount of floor space available

By selecting from a wide range of sizes and duties for standard frame uprights and beams, our pallet racking can be configured to meet precise criteria in terms of load volume and weight, accessibility, handling requirements and space utilisation.  In its standard form pallet racking provides safe, cost-effective storage for many kinds of goods and materials.  However, for increased versatility, we offer a range of practical add-on accessories to make the storage and handling of goods even easier.

Narrow aisle
By allowing fork lift trucks to operate in aisles up to half the width required in conventional adjustable beam pallet racking, Narrow aisle makes excellent use of floor space and maximises the height at which good can be stacked.

Using specialised lift trucks, narrow aisle pallet racking is precision designed for safe, efficient load handling within the tight confines of these space efficient aisles.  Guidance rails or wires fitted at floor level ensure precise positioning of trucks.  This has the multiple benefit of improving safety, whilst minimising the incidence of accidental damage to racking as well as improving the speed and accuracy of load handling.

Double-deep
This is a variant on standard adjustable beam racking.  As the name implies, double-deep allows pallets to be stored two deep but still accessible from the same aisle.  By reducing the number of access aisles and using the space saved to accommodate additional pallet racking, a Double-deep configuration provides highly space-efficient storage system.

Beams can be removed and repositioned when changes in the use of the racking occur.  Although Palletstor is adjustable, once the beams are slotted into postion in the frame uprights, an inter-locking structure of great strength and rigidity is maintained.  Each beam is supplied complete with a pair of steel Safety Locking Pins.  When located they ensure the beam is correctly positioned and helped prevent the beam being dislodged during use.

Drive-in Racking
Drive-in racking provides a space-efficient solution to the storage and throughput of palletised goods.  By dispensing with access aisles drive-in racking provides a high-density of storage in a given area to increase capacity by 60-80% over conventional ‘aisle’ racking.  Racking heights up to 11 meters allow the full height and floor area of the building to be used to provide maximum cubic storage space.

Drive-in racking – the ideal solution for optimum space utilisation without requiring specialist handling equipment.

These area few of our most popular types of pallet racking so if they don’t suit your needs – or if you have questions about them – please contact us for more information.

Our Pallet Racking and accessory range offers a choice of solutions & we can meet any storage application safely, efficiently and cost effectively.  We can provide flexible heavy duty and Hi-Bay storage to suit almost any environment and requirement.
A few minutes on the phone to us can save you time and money. For more information please contact us.
SearchQuest UK Ltd: Internet Marketing

Registered Office: Cornelius House, 178/180 Church Road, Hove, East Sussex BN3 2DJ
Registered in England: 4379562 VAT Registed No: 786815476
 
Frame Joining Unit joins frame to provide heights up to 12 meters Frame Joining Strap secures back-to-back bays quickly and safely Frame available in heights from 1200mm to 3900mm and depths of 450mm to 1200mm Mesh Panels frames can be supplied as open, mesh clad of steel clad Foot Plate clip-on or bolt-on, provides positive floor fixing for added stability Lateral Dividers can be used with specially pierced shelf panels Stepped Beam Beam Tie Shelf Cladding Support – Stepped Beam Shelf Cladding Support – Box Beam Cladding Location Bracket provides positive location for chipboard cladding on boxed beams. Steel Cladding Box Beam Chipboard Shelving Galvanised Steel Shelf Panels span across beams to form a solid steel shelf Vertical Divider: Used to divide shelves horizontally into smaller storage compartments. Reinforced leading edge provides extra strength. Easily repositioned on shelf. Tambour Door Kit: Roller shutter doors for security and dust protection of items stored. When open, door does not protrude into aisle making this an ideal solution for secure storage where aisles are narrow. Full Height Door Kit: Hinged doors transform shelving into a secure storage cupboard. Doors feature full height vertical stiffener, 2 point locking, recessed handle and safety key. Duo Frame: Double skinned box section, clear entry frame. Also allows clear access to the full shelf width, eliminating ‘snagging’ of items stored. Complies with clear access requirements of BS5454. Pull-out Filing Cradle: Can accommodate A4 and foolscap top loaded suspension files. Rear Cladding: Solid interlocking steel sheets that enclose the rear of the bay. Also gives essential stability to the bay structure as an alternative to cross-bracing. Frame Floor Clip: Simple clip-in bracket which allows all types of Stormor frames to be floor fixed. Can be shimmed by using Stormor shim plates. Fits within bay footprint. Floor Plinth: Floor plinths prevent dust and debris collecting under the shelving. Sim0ply clips to the underside of shelf to create a smooth overall finish of the front face. Plastic Drawers: Ideal for the storage of small items. Available in 3 sizes, the drawers tilt on integrated back-stops to allow easy viewing and access. Can also be sub-divided internally using dividers. Half Height Door Kit: Hinged 1100mm high door. Creates secure storage cupboard within shelving. Doors are stiffened to the full height and have 2-point locking, recessed handle and safety key. Pull-out Drawer: Ideal for the storage of CD’s, electronic media and other small items within a shelving bay. Available in 3 heights. Bin Fronts: When fitted these prevent items falling off the front of shelves. Also when used with shelf dividers they form enclosed compartments or ‘bins’. Can be used as heavier duty back-stop. Document Divider: Slim profile divider ideal for paper and record storage. Ensures maximum use of shelf capacity. Easily relocated on shelf. Pull-out Reference Shelf: Provides a flat and stable work surface for document or file reference within the aisle. Part Height Dividers: 150mm high divider which slots either on top or below the shelf to provide storage compartments or support for files and similar tall material. Back Stop: Fits across the rear of bays to prevent files falling off the back of a shelf. Simply slots into the upright. Mesh Cladding: Can be fitted to open frames and as rear cladding for all frame types. Retains visibility and ventilation for the items stored. Box Section Shelf: 25mm welded box section shelf on the front and back edges for greater load bearing capacity. Fits all above frames plus the Euro shelving frame. Clip-in Garment Hanging: System of rail and which fit within bay widths to allow the hanging of garments. Rails can be re-positioned as required to create double hanging space. Under-shelf Divider: Divider simply clips in under the shelf to hold books, files etc upright. Divider can be repositioned as required. For use with dual Use shelves only. Mono Frame: Clear entry, open shelving frame for heavier duty applications and where ventilation is required. Cross Brace: Provides stability bracing for open back shelving. Used where rear cladding is not specified. Dual Use Shelf: 25mm section shelf with a formed open flange. Also carries suspension filing underneath the shelf at appropriate depths. Fits all above frames plus the Euro shelving frame. Solo Frame: Solid frame featuring a delta profile front post with a T-section rear for easy and immediate fitting of cross bracing and cladding.